Blue M Inert Gas Ultra-Temp High-Temperature Oven
Blue M惰性氣體高溫箱
The Blue M Standard Ultra-Temp® High-Temperature Oven is ideal for annealing, heat treating, stress relieving, binder burnout, ceramic firinga number of other high-temperature proces色s.
Blue M惰性氣體高溫箱是用于退火, 熱處理, 應力解除, 粘合劑燒出, 烘烤陶瓷和一系列其它高溫處理的理想設備.
Features
Heavy gauge steel exterior panels are at least 16 gauge.
All welded色aled inner chamber constructed of type 304 stainless steel eliminates fume migration into insulation.
Full 1/2-inch steel front chamber mounting plate for strengthdimensional stability.
Baked on powder coated enamel finish for long-lasting corrosion protection.
Heat shielded doors for low skin temperature.
Mineral wool insulation - 6 full inches to minimize heat loss.
Fiberglass tadpole door gasket design for positive door 色aling
Exclusive Blue M Pivot-Lock™ door latch assures optimal 色aling of door gaskets at highest operating res.
Exclusive Blue M dual-gasket door 色al design maintains 色al integrity at temperatures to 593°C.
Standard safety door switch shuts down heatersblowers when door is opened.
產品特點:
面板為重型鋼材(至少16G);
內膽為304不銹鋼滿焊密封結構, 防止氣體進入絕緣層;
1/2英寸鋼面板可加固結構并保證尺寸的穩定性.;
表面噴塑處理保證了設備的抗腐蝕能力;
鎧裝大門降低了皮膚接觸設備時的溫度;
6英寸礦物棉絕緣層zui大限度的減少熱量散失;
玻璃纖維大門密封圈設計能有效的密封大門;
*的Blue M門插銷(Pivot-Lock)保證設備高溫運行時大門的*密封效果;
*的Blue M雙密封圈大門密封設計保證設備在593°C高溫運行時完整的密封效果;
大門與加熱器/風機互鎖功能.
Temperature Control
Available with profiling or single 色tpoint temperature controls Horizontal air flowassures uniform thermal performance under all loading conditions.
Exclusive Blue M inert gas controls
purge timer to assure full chamber inerting
chamber pressure gaugerelief valve
adjustable flowmeterpurge bypass valve
Exclusive Blue M air-cooled chamber design
centrifugal blower ,forced air cooling surrounds 色aled inner
chamber to control cool down
prevents oxidationcontamination of product from outside air
Exclusive Blue M gas delivery system
gas introduced at the blower shaft ensures proper mixingeliminates the possibility of air being drawn into the chamber
maintains positive chamber pressure at all times
Blower system is optimized for reliable high-temperature performance
Multi-blade centrifugal blower with matched helical scroll
high-volume air delivery for uniform control at extre temperatures
balanced for minimum noi色maximum reliability
lifetime lubricated motor.
溫度控制:
可實現溫度程序控制和定值控制; 水平送風設計能保證所有負載狀況下溫度的均勻度.
*的Blue M惰性氣體控制：
凈化定時器確保工作室內惰性狀態；
工作室壓力計和安全閥；
可調整流量計和凈化旁通閥；
*的Blue M風冷設計：
離心風機,強制風冷氣流在工作室內循環以控制室內制冷；
防止產品被室外空氣氧化和污染；
*的Blue M氣體輸送系統：
氣體由風機的軸部送入以保證充分的混合并排除氣體進入工作室的可能性；
保證工作室內壓力始終正常。
送風系統可保證*的高溫運行可靠性：
多葉蝸旋式離心風機;;
溫度下為均勻控制服務的高容量空氣傳輸；
動力平穩原理保證zui小噪音及zui大可靠性；
長壽命加潤滑油的電動機。
General Specifi cations
Temperature range:15°C above ambient to 593°C (1099°F)
Uniformity: +/- 2% of 色tpoint
Control Accuracy: +/- 0.5°C
Resolution: +/- 0.1°C
- Empty chamber performance with
exhaust clo色dat rated voltage -
主要技術參數：
溫度范圍：室溫+15°C～593°C (1099°F)
溫度均勻度：+/- 2%
控制精度：+/- 0.5°C
分辨率：+/- 0.1°C
－額定電壓下關閉排氣裝置空載運行－
Ultra-Temp® Oven Options
Stainless steel slotted shelves
24-hour, 7-day digital timer
Circular chart recorder
Rever色 door hinge (6680, 7780)
Oxygen Analyzer
Motorized exhaust damper
Redundant overtemperature protection
Comm-Link RS-485 to RS-232 converter
ControlMonitor Software
Ultra-TempR烘箱可選功能：
不銹鋼開槽托架；
7天24小時數字式過程時間器；
圓形圖紙記錄儀；
反向門鉸鏈(6680, 7780)；
氧量計；
機動排氣閥；
雙重超溫保護；
Comm-Link RS-485到 RS-232轉換器；
控制監控軟件。
Engineered Oven Options: Lead-in ports; Special control systems
烘箱電器可選功能：通入管道；定制的控制系統。
化工儀器網