建筑材料難燃性試驗儀     

編號：GD201311030064

規格：JCNR-A

產品名稱：建筑材料難燃性試驗儀

產品型號：JCNR-A

主要用途：

建筑材料難燃性試驗儀適用于確定一種材料是否具有難燃性。試驗裝置包括燃燒豎爐和控制儀器等。

建筑材料難燃性試驗機 

符合GB/T8625、DIN4102《建筑材料難燃性試驗方法》，在規定的條件下判定建筑材料是否具有難燃性，凡是經過燃燒豎爐試驗合格并能通過建筑材料可燃性試驗的材料均可定為難燃性建筑材料。

本方法的試驗裝置主要包括燃燒豎爐及控制儀表兩部分

一、建筑材料難燃性試驗儀試驗裝置:

1、燃燒豎爐：燃燒豎爐主要由燃燒室、燃燒器、試件支架、空氣穩流器及煙道等部分組成。其外形尺寸為1 020mm×1 020mm×3 930mm。

2、燃燒室：燃燒室由爐壁和爐門構成，其內空尺寸為800mm×800mm×2 000mm。爐壁為保溫夾層結構，爐門分為上、下兩門，分別用鉸鏈與爐體連接，其結構與爐壁相似。兩門借助手輪和固定螺桿與爐體閉合。在上爐門和燃燒室后壁設有觀察窗。

3、燃燒器：燃燒器水平置于燃燒室中心，距爐底1 000mm處。

4、試件支架：試件支架為高1 000mm的長方體框架，框架四個側面設有調節試件安裝距離的螺桿，框架由角鋼制成.

5、空氣穩流器：空氣穩流器為一角鋼制成的方框，設置于燃燒器下方。方框底部鋪設鐵絲網，其上鋪設玻璃纖維氈。

6、煙道：燃燒豎爐的煙道為方形的通道，其截面積為500mm×500mm，并位于爐子頂部，下部與燃燒室相通，上部與外部煙囪相接。

二、建筑材料難燃性試驗儀控制儀表：

燃燒豎爐的控制儀表包括流量計、熱電偶、溫度記錄儀及溫度顯示儀表等。

1、流量計：甲烷氣和壓縮空氣所用流量計，甲烷為6~60L/MIN可調，空氣為3~30L/MIN可調。

2、熱電偶：煙道氣溫度和爐壁溫度的測定均采用精度為Ⅱ級，外徑不大于3mm的鎳鉻—鎳硅鎧裝熱電偶。

3、溫度記錄儀及顯示儀表：溫度記錄儀采用精度為0．5級的可連續記錄的電子電位差計；溫度數字顯示儀的精度為±0．5％土一個字。兩種儀表與熱電偶配套并用。

 Building materials burning tester

Number: GD201311030064

Specification: JCNR-A

Product Name: building materials burning tester

Product type: JCNR-A

Main uses:

Building materials burning tester was applied to determine whether a material is hard to burn. The test device comprises a combustion furnace and control instrument.

Difficult flammability for building materials testing machine

According to GB/T8625, DIN4102 "building materials difficult flammability test method", to determine whether the building material is hard to burn under stipulated conditions, usually through the combustion furnace test and by building materials flammability test materials can be difficult flammability for building materials.

=============================================================

The test device of the method mainly comprises a combustion furnace and control instruments part two

A flame test equipment, building materials tester:

1, the combustion furnace: combustion furnace is composed of a combustion chamber, a burner, specimen bracket, air regulator and flue components. Its size is 1 020mm × 1 020mm × 3 930mm.

2, the combustion chamber: the chamber formed by the furnace wall and the furnace door, the inner space size is 800mm × 800mm × 2 000mm. Furnace wall heat preservation sandwich structure, the door is divided into the upper, two doors, and the furnace body is connected by hinges, and the structure of the furnace wall similar. Two door by hand wheel and the fixed screw and the furnace body is closed. In the door and the combustion chamber wall is provided with an observation window.

3: burner, burner level in the center of the combustion chamber, from the bottom 1 000mm.

4, the specimen holder: specimen bracket is a cuboid frame height of 1 000mm, four side frames is provided with a regulating specimen installation distance of the screw, the frame is made of angle steel

5, air regulator: air regulator for angle steel box, is arranged on the burner. The box at the bottom of the laying of barbed wire, which laying glass fiber mat.

6: the burning furnace flue, flue is square channel, the cross section of 500mm * 500mm, and is located in the top of the furnace, the lower part is communicated with the combustion chamber, the upper and external chimney.

Two, building materials burning tester control instrument:

The combustion furnace control instruments including meter, thermocouple, temperature recorder and temperature display instrument.

1, the flowmeter flowmeter: methane gas and compressed air, methane is 6~60L/MIN adjustable, adjustable air 3~30L/MIN.

2, the thermocouple: Determination of flue gas temperature and wall temperature of the gasifier are used in precision for grade II, outside diameter less than 3mm nickel chromium - nickel silicon thermocouple.

3, temperature recorder and display instrument: temperature recorder with precision of 0.5 level can continuously record the electronic potential difference meter; digital temperature display meter with an accuracy of ± 0.5% soil a word. Two kinds of instruments and facilities and thermocouple.

親：

1.可免費為客戶檢測試樣；

2.可以根據不同客戶的需求進行訂做產品。

3.售前，我們專門派技術人員為您設計*的流程和方案；

4.信后，將免費指派技術人員為您調試安裝；

5.保修一年，產品終身維護；

6.常年供應設備的易損件及耗品，以確保產品長期使用。

北京冠測試驗儀器有限公司專注于試驗方法的創新及應用，是集研發、生產、銷售、售后于一體的專業試驗儀器供應商！

咨詢洽談業務!