WT2030 WT2030數字功率計
具體成交價以合同協議為準
- 公司名稱 詠繹電子科技（蘇州）有限公司
- 品牌 YOKOGAWA/日本橫河
- 型號 WT2030
- 產地 日本
- 廠商性質 代理商
- 更新時間 2025/2/20 19:33:39
- 訪問次數 1768
產品標簽
聯系方式：張小姐0512-68051240 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
示波器、頻譜儀、信號源、萬用表、網絡分析儀、功率計、記錄儀、數據采集儀、安規、電源、電子負載、音頻分析儀、視頻分析儀、光譜儀、誤碼儀、總線分析儀、協議分析儀、電能質量分析儀、阻抗分析儀、LCR測試儀、半導體參數測試儀、鉗形表，EMC測試等電子與通信測試儀器和無損檢測儀器
日本YOKOGAWA WT2030數字功率計特點
- 額定值（范圍）
電壓：10/15/30/60/100/150/300/600 V
電流
直接輸入：1/2/5/10/20/30 A
外附分流器輸入：50/100/200 mV - 頻率范圍：DC，2Hz至500 kHz（但對功率而言,zui高300 kHz）
- 基本精度（45Hz≤頻率f≤66Hz）
電壓/電流：±（讀數的0.03%＋量程的0.03%）
功率：±（讀數的0.04%＋量程0.04%）
功率因數效應（在cosφ＝0時）：加量程的±0.1% - 外型尺寸：約426（寬）×132（高）×400（深）mm
- 重量：約13公斤（ 3單元型），約10公斤（1單元型）
- 連接方法和對應型號
| 產品代碼 | 253101 | 253102 | 253103 |
| 單相2線制 | 可用 | 可用 | 可用 |
| 單相3線制 | 1 | 可用 | 可用 |
| 3相3線制 （2電壓,2電流） | 1 | 1 | 可用 |
| 3相3線制 （3電壓,3電流） | 1 | 1 | 可用 |
| 3相4線制 | 1 | 1 | 可用 |
日本YOKOGAWA WT2030數字功率計技術指標
| Input | |||||||
| Item | VoltageV | CurrentA | |||||
| Input circuit type | Floatinginput | ||||||
| Resistive voltage divider | Shuntinput | ||||||
| Rated inputs（range rms） | 10/15/30/60/150/300/600V | Directinput 1/2/5/10/20/30A External shunt input: Approx.100 kΩ | |||||
| Input impedance | Inputresistance Approx. 2 MΩ Input capacitance Approx.15 pF | Directinput: Approx.6 mΩ +approx.0.07 μH External shunt input: Approx:100kΩ | |||||
| Frequency range | DCand 2 Hz to 500 Hz | ||||||
| Instantaneous maximum allowable input for 1s | Thepeak voltage is 2500V, or the RMS value is 3 times the range, whichever is less. | The peak current is 90A,orthe RMS value is 50A,whichever is less. External input:The peak value is 20times the range or less. | |||||
| Continuousmaximum allowable input | The peak voltageis 1400V, or the RMS value is 2.5 times the range, whichever is less. | Thepeak current is 60A,or the RMS value is 35A,whichever is less. External input:Thepeak value is 10 times the range or less. | |||||
| Continuousmaximum common mode voltage | 600 Vrms（whenthe protective cover for the output connector is used）CATII 400 Vrms（whenthe protective cover for the output connector is removed）CATII | ||||||
| Common mode rejection ratio at 600V rms between input terminals and case （50/60 Hz input） | Voltage input terminals shorted,current input terminals opened:Better than -80 dB（±0.01% of rdg or less） | ||||||
| Reference value: 200 KHz max ±（0.18×f）/（Range rating）% of rdg or less（Unit of f:KHz） | Referencevalue: 200 KHz max ±（0.03 ×f）/（Range rating））% of rdg or less（Unit off:KHz） | ||||||
| Input terminals | Bindingposts | Large binding posts External shuntinput:BNC | |||||
| A/D converter | Simultaneousconversion of voltage and current input Resolution:16 bits Maximum:conversion rate:104 KHz | ||||||
| Overloadinput detection
| Alarm lamp lightsat approx.350% of the input range（approx.700% of range when crest factoris 6） | ||||||
| Range switching | Therange can be switched manually,automatically,or by communication control foreach element. | ||||||
| Auto range switching | Range up:When the measuredvalue exceeds 110% of the rated value.or when the peak value exceeds 350%of the peak value. Range down:When the measured value becomes less than30% of the rated value. | ||||||
| Measurement mode Switching | The mode can be setfor each element and also for each voltage and current measurement circuit. | ||||||
| Display Functions | |||||||
| Display: Display contents: | 7-segment LED （light emittingdiode） 4 displays | ||||||
| DISPLAY | Displaycontents | Display resolution | |||||
| A | V,A,W（eachelement） | V,A,W:50000 Wh,Ah:500000 Hz:199999 | |||||
| B | V,A,W（eachelement） | ||||||
| C | V,A,W,VA,var,PF,deg, Vpk（eachelement） | ||||||
| D | V,A,W,Apk,THD,VHz,AHz,Wh ,Ah（eachelement）,η（efficiency） | ||||||
| Unit: Display update rate: Peak hold function: PEAK: ALL: Response time: | m,k,M,V,A,W,VA,var,pk,Hz,h,deg,% Select from 0.25 sec（FAST）,0.5 sec（MID） and 2.0 sec （SLOW）. Selectable tohold item as follows Vpk and Apk can be held at maximum value Measurementvalue of V,A,W,VA,var,Vpk,Apk can be held at maximum value. Maximum of twicethe display update rate（The time taken for the display to fall within is OFF andan abrupt change is made from 0 to 100% of the range, of from 100 to 0% of therange） | ||||||
采購中心
化工儀器網